Warehouse
The data format Warehouse serves to export the data that is necessary for the warehouse configuration. Create and export the data format in the Data » Dynamic export menu. Import the data format in the Data » Dynamic import menu. The Exporting data and Importing data pages of the manual describe how you export and import the data format.
Pay close attention to the exact spelling of the data fields. The data cannot be processed if the data fields are spelled incorrectly.
1. Overview of the data fields
Table 1 explains the data fields for the Warehouse data format in alphabetical order as well as filter options that you set in the Filter tab of the data format.
Field name | Explanation | Filter |
---|---|---|
LocationID |
Storage location ID |
|
LocationMatchingPosition |
The system of storage locations has changed. Storage locations used before version 4.305 have to be migrated to the new system. |
|
LocationName |
Storage location name |
|
LocationPosition |
The storage location’s position |
|
LocationType |
Storage location type |
|
RackID |
Rack ID |
Activate the filter, select the operator and enter the value. |
RackName |
Rack name |
|
RackPosition |
The rack’s position number |
|
RackWarehouseID |
The rack’s ID in the warehouse |
Activate the filter and use the drop-down list to select the warehouse that the rack is located in. |
RackZone |
The zone that the rack is located in |
|
ShelfID |
Shelf ID |
|
ShelfLevel |
Shelf level |
|
ShelfName |
Shelf name |
Table 1: data fields of the data format Warehouse
For further information about configuring the warehouse, refer to the Racks page of the manual.
2. Overview of the mandatory fields
The following mandatory field must be available for the data format Warehouse and needs to have a valid value saved for it:
-
RackWarehouseID
The Import procedure option has to be set to Import for this field.
3. Overview of the synchronisation fields
The following data field is available for data synchronisation. This data field is a mandatory synchronisation field. For mandatory synchronisation fields, select the option Synchronisation as Import procedure.
-
LocationID = Storage location ID