Skip to main content
  2. Data
  3. Old: Dynamic data exchange
  4. Data formats
  5. VariationBarcode

VariationBarcode

The data format VariationBarcode is used to export barcodes. Barcodes are created in the Setup » Item » Barcode menu. Create and export the data format in the Data » Dynamic export menu. The Exporting data page of the manual describes how you export the data format.

Pay close attention to the exact spelling of the data fields. The data cannot be processed if the data fields are spelled incorrectly.

1. Overview of the data fields

Table 1 explains the data fields for the VariationBarcode data format in alphabetical order as well as filter options that you set in the Filter tab of the data format.

Table 1. Data fields of the data format VariationBarcode
Field name Explanation Filter

BarcodeID

ID of barcode

Activate the filter and select the value from the drop-down list.

BarcodeName

Barcode name

BarcodeType

Barcode type

Activate the filter and select the value from the drop-down list.

Code

Code

VariationNumber

(previously VariationCustomNumber) Variation number

VariationID

Variation ID

Activate the filter, select the operator and enter the value.

2. Overview of the synchronisation fields

The data fields that are listed in table 2 are available for data synchronisation. These data fields are mandatory synchronisation fields. For mandatory synchronisation fields, select the option Synchronisation as Import procedure. At least one of the data fields from the following table must be selected for synchronisation.

Table 2. Data fields with the import procedure set to Synchronisation
Field name Explanation

VariationCustomNumber

Variation number
To top