Skip to main content

Warehouse

The data format Warehouse serves to export the data that is necessary for the warehouse configuration. Create and export the data format in the Data » Dynamic export menu. Import the data format in the Data » Dynamic import menu. The Exporting data and Importing data pages of the manual describe how you export and import the data format.

Pay close attention to the exact spelling of the data fields. The data cannot be processed if the data fields are spelled incorrectly.

1. Overview of the data fields

Table 1 explains the data fields for the Warehouse data format in alphabetical order as well as filter options that you set in the Filter tab of the data format.

Field name Explanation Filter

LocationID

Storage location ID

LocationMatchingPosition

The system of storage locations has changed. Storage locations used before version 4.305 have to be migrated to the new system.
This field is used for the transfer.

LocationName

Storage location name

LocationPosition

The storage location’s position

LocationType

Storage location type

RackID

Rack ID

Activate the filter, select the operator and enter the value.

RackName

Rack name

RackPosition

The rack’s position number

RackWarehouseID

The rack’s ID in the warehouse

Activate the filter and use the drop-down list to select the warehouse that the rack is located in.

RackZone

The zone that the rack is located in

ShelfID

Shelf ID

ShelfLevel

Shelf level

ShelfName

Shelf name

Table 1: data fields of the data format Warehouse

For further information about configuring the warehouse, refer to the Racks page of the manual.

2. Overview of the mandatory fields

The following mandatory field must be available for the data format Warehouse and needs to have a valid value saved for it:

  • RackWarehouseID

The Import procedure option has to be set to Import for this field.

3. Overview of the synchronisation fields

The following data field is available for data synchronisation. This data field is a mandatory synchronisation field. For mandatory synchronisation fields, select the option Synchronisation as Import procedure.

  • LocationID = Storage location ID

To top